Home > Knowledge > Content
Maintenance of electronic Watches
- May 07, 2018 -


Electronic watch in the temperature 25~28℃, a day and night error in less than a second, when the temperature to 0 ℃ below or 50 ℃ or more, each day and night will be two seconds slow. At the same time, when the temperature is as high as 60 ℃, the LCD plate will become black, the temperature drops below 0 ℃, the LCD will lose the display function, so to the winter, electronic watches can only wear on the wrist, rely on the body's thermostat to maintain its normal timing. In addition, high temperature and low temperature will also cause battery leakage, corrosion of the movement. Electronic watch batteries can be used for more than one year, but the lighting power consumption is large, the power consumption of one second is equivalent to the timing of more than one hour. When the battery is running out of power, the lights will dim or the numbers may appear dimmed or even disappear when it is turned on. Replace the battery, if you do not know how to repair the table technology, should be sent to repair shop installation.

and the battery specification is not standardized, a variety of brand batteries, can not be arbitrarily used. Electronic Watch to note: Press the button can not be too strong to avoid failure, the LCD board use 5-7 years to be replaced by a new one, the battery without electricity to be removed in time, so as to avoid fluid corrosion movement. Found that the light is not bright, button failure, time suddenly there is a large error to repair, may be the component solder contact bad or off. Electronic watches, especially digital electronic watches, are generally poor in waterproof performance. Although some in the manual or back cover printed on the "waterproof" words, but also to avoid contact with water. The structure of electronic watches, unlike mechanical watches, are electronic circuits and electronic components that, in the event of water, will be "catastrophic", making the entire watch obsolete. In particular, the LCD and integrated line, not only afraid of water, is the tide, a long time will also fail. Therefore, wash your face, washing the best to take off the table. Avoid splashing rain when it rains. If you find that the electronic watch into the water, or Cooto the inner wall gathers water vapor, should immediately send the repair table shop for the removal of moisture, discharge treatment.


Previous: Wrist Watch Water Treatment

Next: No Information

Copyright © Shenzhen Yucheng Watch Co.,Ltd. All Rights Reserved.